Handsfree retrofit for Audi A6 4F "Bluetooth Only" MMI 2G, 762,00 from www.need4street.de
Introduction
The Audi A6 is one of the most popular luxury vehicles in the market today. This car comes equipped with a wide range of features, including Bluetooth connectivity. However, if you own an older model of the Audi A6, you may not have this feature. In this article, we will guide you through the process of retrofitting Bluetooth in your Audi A6.
What is Bluetooth Retrofitting?
Bluetooth retrofitting is the process of adding Bluetooth connectivity to a vehicle that did not have it from the factory. This process involves installing a Bluetooth module and wiring it into the car's audio system. The module allows you to connect your phone to the car's audio system wirelessly, enabling you to listen to music, make calls, and access other features without the need for cables.
Why Should You Retrofit Bluetooth in Your Audi A6?
There are several reasons why you should retrofit Bluetooth in your Audi A6. Firstly, it allows you to enjoy hands-free calling, making it safer to operate your car. Secondly, it enables you to stream music from your phone, providing you with a wider range of music options. Lastly, retrofitting Bluetooth can increase the resale value of your car.
What You Will Need
Before you start retrofitting Bluetooth in your Audi A6, you will need a few things. Firstly, you will need a Bluetooth module that is compatible with your car's audio system. Secondly, you will need a wiring harness that connects the module to the car's audio system. Lastly, you will need a set of tools, including a screwdriver, pliers, and wire strippers.
Step-by-Step Guide to Retrofitting Bluetooth in Your Audi A6
Step 1: Remove the Radio
The first step in retrofitting Bluetooth in your Audi A6 is to remove the radio. To do this, use a screwdriver to remove the screws that hold the radio in place. Once the screws are removed, gently pull the radio out of the dash.
Step 2: Connect the Wiring Harness
Once the radio is removed, connect the wiring harness to the back of the radio. The wiring harness should have a connector that matches the one on the back of the radio. Once the harness is connected, route the wires to the location where you want to install the Bluetooth module.
Step 3: Install the Bluetooth Module
Once the wiring harness is in place, install the Bluetooth module in the location you have chosen. The module should be mounted securely and should not be in the way of any other components.
Step 4: Connect the Bluetooth Module to the Wiring Harness
Once the module is installed, connect it to the wiring harness. The module should have a connector that matches the one on the harness. Once the module is connected, route the wires to the back of the radio.
Step 5: Reinstall the Radio
Once the module is connected, reinstall the radio. Use the screws you removed in step one to secure the radio back in place.
Step 6: Test the Bluetooth Connection
Once the radio is reinstalled, test the Bluetooth connection. Turn on your phone's Bluetooth and connect it to the car's audio system. Once connected, test the audio by playing music or making a call.
Conclusion
Retrofitting Bluetooth in your Audi A6 is a relatively simple process that can provide you with a wide range of benefits. Not only does it make your car safer to operate, but it also provides you with a wider range of music options and can increase the resale value of your car. Follow the steps outlined in this article, and you'll be enjoying hands-free calling and wireless music streaming in no time!
Komentar
Posting Komentar